LD-5R Digital Dust Indicator

Compact handheld dust indicator
Performs real time measurement of suspended particle matter (SPM) in indoor spaces, public spaces and for industrial health purposes

LD-5R PM2.5 Digital Dust Indicator

LD-5R digital dust indicator equipped with a PM2.5 cyclone particle size selector Portable and performs simplified measurement of PM2.5 concentrations on a real time basis

LV-20P is for measuring dust concentration in the air. A suction pump, a flow meter and a tripod are in one box but it is light and easy to carry around. max. suction pressure: 10kPa intake flow rate: 20L/min

OFD-1 makes it possible for you to calibrate HV-series easily and quickly on a digital display. This is on-site flow rate calibrator for HV-air sampler HV-500R/-500F/RW/-700R/-700F/-1000F/-1000R.

The LD-3B is the latest model for measuring dust particles in the work environment. The LD-3B determines relative dust concentrations by measuring the intensity of laser beam scattered by dust.

The LD-5D is an aerosol photometer designed to read relative mass concentration of aerosol in high concentration. It is designed to read mg/m3 directly, however it should be remembered that the calibration is strictly valid for the calibration particle.

The LD-6N is an aerosol photometer designed to read relative mass concentration of aerosol. It can used to measure the personel exposure to the dust.

The FLD-1, Real-time Dust Monitor, is a measuring instrument using light scattering method. It has Digital Dust Indicator inside the cabinet continuously sampling of particles at outdoor locations.

The LV-40BW is poratble low volume air sampling pump designed for measurement of particle matter in industrial hygiene and measurement in ambient air. It is portable and supports both AC and DC power supplies.

The HV-500R is a compact and transportable sampler for Industrial hygiene built to sample at a suction flow rate of 100 to 800L/min. It has various features and has many attachments for various uses.

The HV-RW is samplers intended for outdoor use. High-accuracy flow rate control is provided by a differential pressure detection system. Reductions in suction flow rate due to increased dust collection are minimized thanks to a constant flow rate function.

A small air sampling pump driven by dry batteries must have high suction pressure and stable flow rate, and be used for many hours and light for outdoor handling. This long seller Sampling Mini-Pump MP-2N is adaptable to these demands.

A small air sampling pump driven by dry batteries must have high suction pressure and stable flow rate, and be used for many hours and light for outdoor handling. This long seller Sampling Mini-Pump MP-ΣNII is adaptable to these demands.

This device collects harmful particulate and liquid and/or gaseous substances found in the work environment. and is operated using the Mini pump from SIBATA.

Recently fine particles of asbestos were found to be cancerous. The APS-7 is a sampler that can evaluate asbestos workshop environments. It is based on the Asbestos Association method, and is operated using the Mini pump from SIBATA.

We have various type of filter holder for air sampling.

The SIBATA Fiber Monitor, Model F-1K, is as an asbestos monitor which measures relative fiber concentration. It detects only fiber particles. Sampling air flows into the body and pass through the screening section and sampling filter.

Silica gel tube in which DNPH is coated for gas sampling.

This test paper for Coliform Group and General Bacteria are treated with special reagents, and used to test water, milk, fresh and frozen foods.

Used for the determination of free chlorine in drinking or swimming pool water.The procedure is very simple and quick.

When something is accessible, it is uncomplicated and easy to use. How should a water quality measurement device operate and work. The AQUAB is one of SIBATA’s solutions.

The MT-03 is a portable tester for testing the mask fitness to the face. The leak rate is obtained by counting the number of larger particles that pore size of the mask’s filter in the inside and outside of the mask, respectively.

This device collects harmful particulate and liquid and/or gaseous substances found in the work environment. and is operated using the Mini pump from SIBATA.